Skip to Main Content
Care & Maintenance

Easy to care,
simple to maintain

We produce surfaces that are incredibly durable and nonporous, so they’re virtually maintenance-free. For daily routine care, just follow the simple tips below to benefit from timeless performance and appearance.

Keep your surface safe

  • Simple Cleaning

    A splash of warm soapy water will do

  • Removing Stains

    Gently rub with an approved cleaner and rinse

  • Cleaning Products

    Use your regular home cleaning products

  • Preventing Patina

    Wipe away any liquid spills and splashes. The surface should always be kept dry

  • Caring for Dark Surfaces

    Patina and stains may be more noticeable. Cream-colored cleaning products are not recommended

  • Avoiding Scratches

    Always use a cutting board and clear away sharp objects

  • Heat Caution

    Always place hot cookware on a trivet or hot pad

  • Chemicals

    Prolonged exposure may damage the surface. Chemicals with high or low pH levels should be used with caution.
download guide to caring for Quartz & Mineral

Step-by-Step Care

  1. Wipe the surface with a soft cloth or a non-abrasive scourer dipped in warm water mixed with a mild detergent. Thoroughly rinse with water, and dry with a soft cloth or paper towel.

  2. Always wipe up wet spills, to prevent patina from forming.

  3. Check each cleaning product first on an inconspicuous area to ensure that it doesn’t damage the surface. The patina build-up may look like a light-coloured stain.

  4. Please note that Honed, Concrete and Rough finishes require more cleaning than our Polished finishes, and metalmarks, fingerprints and other signs of daily living may be more visible. However, most of these marks can be removed with little effort and non-abrasive cleaning products such as CIF cream or Cilit Bang Bleach & Hygiene.

  1. Gently rub the area using a soft cloth or paper towel with an approved cleaner.

  2. Clean a larger area rather than the stain itself, in a circular motion.

  3. Rinse with water, and dry with a soft cloth or paper towel.

  4. Repeat this process if the stain is still visible.

  1. Reanimate dried spills and stains with water for several minutes

  2. Apply CIF cream with Bleach in a circular motion.

  3. Clean the surface with a damp cloth or paper towel.

  1. Place a small amount of Barkeeper’s Friend® power spray or oxalic acid on a damp cloth. Do not use an abrasive scourer.

  2. Wipe away very gently, in a circular motion.

  3. Rinse thoroughly with warm water, and dry with a soft cloth or paper towel.

  4. Follow these instructions carefully to avoid damaging the surface.

Feel confident with our warranty

Our surfaces come with a comprehensive warranty for complete peace of mind

Our Warranty

Top Care and Maintenance FAQ

Our quartz & mineral surfaces are highly resistant to just about anything, including cracks, scratches, and stains because they are non-porous. This also eliminates the need for sealing or polishing and reduces bacterial growth potential. You never need to apply a sealer to any Caesarstone surface.

Gently rub the area using a soft cloth or paper towel with an approved cleaner. Clean a larger size than the stain itself in a circular motion. Rinse with water, and dry with a soft cloth or paper towel. Repeat the process if the stain is still visible.

Caesarstone surfaces are durable and nonporous, making them virtually maintenance-free.

Our carefree maintenance and everlasting benefits in performance and appearance give you peace of mind, knowing your surface is completely safe and durable.

A splash of warm water and soap or a mild detergent for everyday routine cleaning will do. Plant oil-based soaps should be avoided. Our surfaces are extremely strong, nonporous, and stain-resistant, so wipe with a soft cloth or dip in warm soapy water, then rinse with water and dry with a soft cloth or paper towel.

For tougher blemishes, apply a non-abrasive cleaner or a mild degreaser on a damp cloth and wipe the surface. Rinse with warm water to wash away the residue and dry with a paper towel; your surface is as good as new! Doing a deep cleaning once a month is recommended to prevent patina buildup.

It’s always good to wipe away wet spills immediately, to prevent a patina from building up.

Finishes other than Polished may need more daily maintenance due to their unique patterns and finishes.

First, reanimate the spill with water for several minutes to remove adhered material. Then, follow our recommended cleaning methods and clean the surface with a damp cloth to remove any leftover marks and any residual dirt. Do not use any abrasive pads to clean tougher dirt, as they can damage the finish and sheen of your surface.

See more FAQ